Heating and Air Help for Keene Homeowners
Texas Heat & Air serves Keene homes from our shop at 104 Vantage Dr, Suite B, in Cleburne. We are a family owned contractor, in business since 2013, and we hold Texas A/C contractor license TACLB00051450E, issued by TDLR. Keene work includes AC repair, AC installation and replacement, heating and heat pump repair, urgent heating and cooling problems, and maintenance.
Keene is an older housing town, and that shapes almost every service call here. Most homes were built before 1990, a large share are manufactured homes, and the city spreads across three ZIP codes, so your exact address matters more here than in most towns we serve. Call (682) 438-8127 with your address and we will confirm coverage before you book. Our office hours are Monday to Friday, 8 AM to 5 PM.
Services in Keene
- AC Repair: diagnosis and repair for older Keene systems, with the ductwork and attic equipment checked alongside the unit itself.
- AC Installation & Replacement: new systems sized to the house, with Keene’s permit, attic access, and condensate rules followed as part of the job.
- Heating & Heat Pump Repair: gas furnaces, electric furnaces and heat pumps, including older heat pumps that lean hard on auxiliary heat in a freeze.
- Urgent AC & Heating Problems: what to do and how to reach us when a Keene home loses heating in a freeze or cooling in dangerous heat, or has a safety problem.
- Maintenance & all HVAC services: the full list of services, including spring cooling checks and fall heating checks suited to older Keene systems.
Based in Cleburne: our shop is at 104 Vantage Dr, Suite B, Cleburne, TX 76031, and Keene sits right next to our home service area. See our Cleburne hub for where we are based and our Granbury page for another town we serve, or check the full list of cities we serve. Texas Heat & Air is family owned and holds license TACLB00051450E.
Keene’s Older Homes Set the Terms for HVAC Work
Keene has the oldest housing stock of the towns around our Cleburne shop. Of the city’s 2,697 homes, 64.0% were built before 1990, 29.0% were built from 1990 to 2009, and only 7.0% were built in 2010 or later. The median Keene home was built in 1985. That means most Keene systems are replacements, not originals, and most Keene ductwork has been in the attic for decades.
Older ducts are the quiet problem behind many Keene service calls. Leaky, crushed, or undersized duct runs explain the room that never cools and the system that runs all afternoon without catching up. When we assess an older Keene home, we look at the unit, the ducts, and the attic access together, because fixing only the unit often leaves the real problem in place. Keene’s own code amendments even set a minimum attic opening of 20 inches by 30 inches for appliances, which tells you how much of this town’s equipment lives above the ceiling.
Manufactured homes are a major part of Keene, not a side note: 15.2% of homes here, about 409 homes, are mobile or manufactured. Those homes usually run packaged units or manufactured home furnaces with crossover ducts under the floor, and they cool and heat differently from site built homes. We service manufactured home systems regularly, so tell us your home type when you call and we will talk through the checks that apply to it.
| Built | Share of homes |
|---|---|
| Before 1990 | 64.0% |
| 1990 to 2009 | 29.0% |
| 2010 or later | 7.0% |
In words: of Keene’s 2,697 homes, 64.0% were built before 1990, 29.0% from 1990 to 2009, and 7.0% in 2010 or later. The median Keene home was built in 1985. Source: U.S. Census Bureau, American Community Survey 2020 to 2024 (tables B25034 and B25035).
Permits and Codes for HVAC Work in Keene
Keene’s adopted codes are direct about replacement work: under Section 105.1 of the city’s Combined Amendments to the 2018 I-Codes, replacing a mechanical system requires applying for and obtaining a permit first. Ordinary repairs and portable equipment are treated differently from a fixed system replacement. Permit applications are handled in person at City Hall, online at keenetx.com, or by emailing the application to [email protected].
Keene builds to the 2018 I-Codes, covering the building, mechanical, residential, fuel gas, and energy codes, with regional amendments published by Development Services. The amendments also spell out details that matter on real jobs here, including a minimum attic access opening of 20 inches by 30 inches for appliances and the city’s condensate disposal rules for equipment above living space. When we replace a system in Keene, we follow the permit process and those local rules as part of the job. Rules change, so confirm the current requirements with the City of Keene.
Power and Gas in Keene
Keene splits its electric service by address. Oncor serves Keene, including the 76059 area, and some Keene addresses are served by United Cooperative Services instead. Your bill tells you which one you have. It matters before a replacement, because any efficiency program or rebate comes from your own provider, on its own terms, and those offers change. Confirm your provider and its current programs yourself, and we will quote and size the system the same either way.
Atmos Energy provides natural gas service in Keene, but not every Keene home has a gas line, and we make no assumption about yours. Homes with a gas line often run a gas furnace. Homes without one heat with a heat pump or an electric furnace, and that pattern is common in Keene’s older and manufactured homes. We repair all three kinds of system, and we will identify what your home has during the visit if you are not sure.
Frequently Asked Questions
Do I need a permit to replace my AC in Keene?
Yes. Section 105.1 of Keene’s adopted 2018 I-Codes amendments requires a permit before a mechanical system is replaced. Applications are handled in person at City Hall, online at keenetx.com, or by email to [email protected]. Ordinary repairs are treated differently from a full replacement.
My Keene house was built in the 1980s. Should I repair or replace?
Judge the system, not the house. With a median build year of 1985, most Keene homes are on a replacement system already, and many are on their second. If the unit itself is 15 years old or older, price both a repair and a replacement and compare them side by side. We will show you both costs and say plainly if a repair is the smarter spend.
I do not have a gas line. What heats my home?
Most likely a heat pump or an electric furnace. Atmos Energy serves Keene, but many Keene homes were built without a gas line and heat electrically. We repair heat pumps and electric furnaces, including auxiliary heat problems, so call (682) 438-8127 and describe what your system does.
Which ZIP codes in Keene do you cover?
Keene spans three ZIP codes: 76059 covers about 43.7% of the city’s land, 76031 about 40.6%, and 76009 about 15.8%, and parts of the last two belong to neighboring towns as well. That is why we confirm by address. Call (682) 438-8127 with your address and we will confirm coverage before you book.
Is my Keene home on Oncor or United Cooperative Services?
It goes by address. Oncor serves Keene, and some Keene addresses are on United Cooperative Services. Check your electric bill to see which one you have. It decides which provider’s efficiency programs, if any, could apply to a new system.
Do you service manufactured homes in Keene?
Yes, and in Keene that is a large part of the work: 15.2% of homes here are mobile or manufactured. We service packaged units, manufactured home furnaces, and the crossover ductwork under the home. Tell us the home type when you call.
Where are you based, and are you licensed?
Our shop is at 104 Vantage Dr, Suite B, Cleburne, TX 76031, and we have been in business since 2013. Texas Heat & Air is family owned and holds Texas A/C contractor license TACLB00051450E, issued by TDLR. Call (682) 438-8127 to book or to confirm coverage for your Keene address.
Need HVAC Service?
Call Texas Heat & Air for service availability.